|
|
|
All articles are in .pdf format and must be viewed using Adobe Acrobat Reader. Click "Get Acrobat Reader" to get a copy. Remember that your browser (e.g. Netscape) must also have its preferences configured to use Acrobat to view .pdf files.
Adams, Mr. Terry & Mr. Richard Temple (Volume 16-2, March, 2000)
Aggarwal, Dr. M.L., Dr. B.C. Gupta, Dr. S. Roy Chaudhury & Dr. H.F. Walker
(Volume 18-4, August 2002)
Al-Sehali, Dr. Saud, Dr. Ali Kashef & Dr. Mahyar Izadi & Dr. Saud H. Al-Sehali (Volume 17-3, May, 2001)
Alyabis, Dr. Fahad A. (Volume 17-1, December, 2000)
Amos, Dr. Scott J., Dr. R. Neal Callahan and Dr. Shawn S. Strong (Volume 20-4, September 2004)
Amos, Dr. Scott J., Dr. Shawn S. Strong and Dr. Neal R. Callahan (Volume 19-3, May 2003)
Anderson, Ms. Tracey & Dr. George R. Maughan (Volume 21-4, October 2005)
Armentano, Mr. Terence, Dr. Paul Cesarini & Dr. John W. Sinn (Volume 22-4, October 2006)
Athinarayanan, Dr. Ragu, Dr. Rada Balamuralikrishna, & Dr. Xueshu Song (Volume 16-3, May, 2000)
Bailey, Mr. Bill D., Mr. Terry Bilke, Ms. Jingqing Xia, Dr. Suhansa Rodchua and Dr. John Sinn (Volume 22-4, October 2006)
Bailey, Mr. Bill D. & Dr. Paul Cheng-Hsin Liu (Volume 15-1, November, 1998)
Baird, Dr. David & Dr. Gary Frey (Volume 16-4, September, 2000)
Balamuralikrishna, Dr. Rada, Dr. Ragu Athinarayanan & Dr. Xueshu Song (Volume 16-3, May, 2000)
Balzer, Dr. Brian B. & Dr. Jeff McNabb (Volume 24-3, July 2008)
Belcher, Dr. Greg, Dr. Brian A. Sandford & Dr. Robert L. Frisbee (Volume 22-4, October 2006)
Belcher, Dr. Greg & Dr. Robert L. Frisbee (Volume 15-3, June 1999)
Bensen, Dr. Ted, Dr. H. Naik Dharavath & Mr. Bhaskar Gaddam (Volume 21-3, July 2005)
Bensen, Dr. Ted & Dr. H. Naik Dharavath (Volume 20-3, June 2004)
Bilke, Mr. Terry, Ms. Jingqing Xia, Mr. Bill D. Bailey, Dr. Suhansa Rodchua and Dr. John Sinn (Volume 22-4, October 2006)
Bishop, Mr. Mike, Dr. Todd C. Waggoner & Dr. Edward C. Kennedy III (Volume 19-2, February 2003)
Bonnette,Dr. Roy (Volume 21-1, January 2005)
Boser, Dr. Richard and Dr. Kenneth W. Stier (Volume 21-2, April 2005)
Boser, Dr. Richard, Mr. Tory Ragsdale, and Dr. Charles Duvel (Volume 18-3, May 2002)
Bostic, Dr. M. L. (Volume 15-1, November, 1998)
Boyd, Dr. Greg & Dr. Sophia Scott (Volume 24-4, December 2008)
Bradney, Dr. David D. (Volume 16-4, August, 2000)
Braglia, Dr. Marcello & Dr. Alberto Petroni (Volume 15-4, September, 1999)
Brown, Dr. Angelo D., Mr. Anbu Lingappan, Dr. John W. Sinn, and Dr. Todd C. Waggoner (Volume 16-1, January, 2000)
Brown, Dr. Dan & Dr. Ron Meier (Volume 24-2, May 2008)
Brown, Dr. Dan C. & Dr. Ron Meier (Volume 21-4, October 2005)
Brown, Dr. Dan, Dr. Rodney L. Custer & Dr. Klaus Schmidt (Volume 20-4, September 2004)
Brown, Dr. Ryan & Dr. Kenneth Stier (Volume 18-1, December, 2001)
Brown, Dr. Ryan & Dr. Kenneth Stier (Volume 17-1, December, 2000)
Burgess, Dr. Lesta A. & Dr. Shawn S. Strong (Volume 19-3, May 2003)
-C-
Cadorette, Mr. Michael L. & Dr. H. Fred Walker (Volume 22-2, June 2006)
Callahan, Dr. R. Neal, Dr. Martin Jones, & Mr. Rathel R. Smith (Volume 24-4, December 2008)
Callahan, Dr. R. Neal, Mr. Rathel R. (Dick) Smith, & Dr. Steven W. McCrary (Volume 23-1, January 2007)
Callahan, Dr. R. Neal, Dr. Steven W. McCrary and Mr. Rathel R. Smith (Volume 22-3, September 2006)
Callahan, Dr. Neal, Mr. Rathel R. Smith and Dr. Shawn S. Strong (Volume 21-3, August 2005)
Callahan, Dr. Neal, Dr. Scott J. Amos and Dr. Shawn S. Strong (Volume 20-4, September 2004)
Callahan, Dr. Neal, Dr. Shawn S. Strong and Dr. Scott J. Amos (Volume 19-3, May 2003)
Centko, Mr. John, Dr. Ronald L. Meier, Dr. Michael Williams, & Dr. Michael Humphreys (Volume 15-3, June, 1999)
Cesarini, Dr. Paul, Dr. John W. Sinn & Mr. Terence Armentano (Volume 22-4, October 2006)
Cesarini, Dr. Paul & Mr. Frank Wiewandt (Volume 22-3, July 2005)
Cesarini, Dr. Paul & Mr. Jason Mellen (Volume 21-2, April 2005)
Cesarini, Dr. Paul (Volume 20-4, November 2004)
Chang, Dr. Tao C. & Dr. John C. Dugger (Volume 17-3, May 2001)
Chang, Dr. Tao C., Mr. Luke H. Huang & Dr. Joseph C. Chen (Volume 15-2, March, 1999)
Chang, Dr. Tao C. (Volume 15-1, November 1998)
Chaudhury, Dr. S. Roy, Dr. M.L. Aggarwal, Dr. B.C. Gupta, & Dr. H.F. Walker
(Volume 18-4, August 2002)
Chen, Mr. Chih-Hsien & Dr. Shuo-Yan Chou (Volume 22-1, March 2006)
Chen, Dr. Daniel & Dr. Frank Cheng (Volume 16-1, November 1999)
Chen, Dr. Jacob, Dr. Bernie P. Huang & Dr. Joseph C. Chen (Volume 20-4, November 2004)
Chen, Dr. Jacob & Dr. Joseph C. Chen (Volume 20-2, March 2004)
Chen, Mr. Jacob & Dr. Joseph C. Chen (Volume 18-1, November 2001)
Chen, Dr. Joseph C., Dr. Bernie P. Huang & Dr. Jacob Chen (Volume 20-4, November 2004)
Chen, Dr. Joseph C., Mr. E. Daniel Kirby & Ms. Zhe Zhang (Volume 20-4, November 2004)
Chen, Dr. Joseph C. & Dr. Jacob Chen (Volume 20-2, March 2004)
Chen, Dr. Joseph C. & Mr. Jacob Chen (Volume 18-1, November 2001)
Chen, Dr. Joseph C. & Dr. John L. Yang (Volume 17-2, March 2001)
Chen , Dr. Joseph C. & Mr. Luke Huang (Volume 17-2, February 2001)
Chen, Dr. Joseph C. & Dr. Ming-Hsien Caleb Li (Volume 17-1, November 2000)
Chen, Dr. Joseph C. & Mr. Po-Tsang Huang (Volume 16-2, March, 2000)
Chen, Dr. Joseph C. & Ms. Seung-Eun Lee (Volume 16-1, December, 1999)
Chen, Dr. Joseph C., Dr. John C. Dugger, & Mr. Samson S. Lee (Volume 16-1, November, 1999)
Chen, Dr. Joseph C. & Dr. Mandara D. Savage (Volume 15-4, September, 1999)
Chen, Dr. Joseph C. & Dr. Chien-Pen Chuang (Volume 15-4, August, 1999)
Chen, Dr. Joseph C., Mr. Po=Tsang Huang, & Dr. Chai-Yu Chou (Volume 15-3, June, 1999)
Chen, Dr. Joseph C., Dr. Chien-Pen Chuang, & Ms. Xing Lan (Volume 15-3, May, 1999)
Chen, Dr. Joseph C., Mr. Luke H. Huang, Ms. Ashley X. Lan, & Mr. Samson Lee (Volume 15-3, May, 1999)
Chen, Dr. Joseph C., Mr. Luke H. Huang & Dr. Tao Chang (Volume 15-2, March, 1999)
Chen, Dr. Joseph C., Dr. Caleb M. Li & Dr. Mike S. Lou (Volume 15-1, November, 1998)
Chen, Dr. Joseph C., Dr. Mike S. Lou, & Dr. Caleb M. Li (Volume 15-1, November, 1998)
Chen, Dr. Shian-Fong & Mr. Yong-Jin Liu (Volume 17-4, August, 2001)
Cheng, Mr. Chao-Wei & Dr. Jai W. Hong (Volume 20-3, July 2004)
Cheng, Dr. Frank & Dr. Daniel Chen (Volume 16-1, November, 1999)
Chin, Dr. Robert A. (Volume 24-4, December 2008)
Chin, Dr. Robert A. (Volume 23-2, June 2007)
Chin, Dr. Robert A. (Volume 15-2, February, 1999)
Ching, Dr. Chung Yaw, Mr. Chang Lin Yang & Dr. Tsung Shin Hsu (Volume 18-2, February 2002)
Cho, Dr. B. Are, Ms. Jami Kovach, Ms. Paris Stringfellow, and Ms. Jennifer Turner (Volume 21-3, July 2005)
Chou, Dr. Chai-Yu, Mr. Po-Tsang Huang, & Dr. Joseph C. Chen (Volume 15-3, June, 1999)
Chou, Dr. Chao-Yu, Dr. Hui-Rong Liu, & Dr. Chau-Chen Torng (Volume 15-1, November, 1998)
Chou, Dr. Shuo-Yan & Mr. Chih-Hsien Chen (Volume 22-1, March 2006)
Chrusciel, Mr. Donald & Dr. Dennis W. Field (Volume 19-4, August 2003)
Chuang, Dr. Chien-Pen & Dr. Joseph C. Chen (Volume 15-4, August, 1999)
Chuang, Dr. Chien-Pen, Ms. Xing Lan, & Dr. Joseph C. Chen (Volume 15-3, May, 1999)
Clyburn, Dr. William W. & Dr. W.C. Johnson (Volume 17-3, May 2001
Co, Ms. Betty, Mr. Ronald J. Glotzbach & Mr. Terry L. Burton (Volume 24-4, October 2008)
Coddington, Dr. Charles E. & Dr. Ahmad Zargari (Volume 15-2, March, 1999)
Colvard, Dr. Robert G, Dr. Kenneth W. Hollman & Dr. Emily J. Norman Zietz (Volume 15-2, March, 1999)
Cooper, Mr. John & Dr. Bruce DeRuntz (Volume 23-2, April 2007)
Corley, Dr. Melvin R., Dr. Steven W. McCrary, Mr. David Leslie, & Dr. Freddy L. Roberts (Volume 23-2, April 2007)
Cox, Mr. Bruce, & Dr. Earnest L. Walker (Volume 15-3, May, 1999)
Croft, Dr. William E. (Volume 16-2, March, 2000)
Crother, Dr. Cyndi A. (Volume 16-4, August, 2000)
Custer, Dr. Rodney L., Dr. Dan Brown & Dr. Klaus Schmidt (Volume 20-4, September 2004)
Custer, Dr Rodney L. & Dr. Joseph Scarcella (Volume 15-1, November, 1998)
De Leon, Dr. John (Volume 21-2, April 2005)
De Leon, Dr. John, & Dr. Vedaraman Sriraman (Volume 15-3, May 1999)
De Miranda, Dr. Michael A. & Dr. James E. Folkestad (Volume 18-1, December 2001)
De Miranda, Dr. Michael A. & Dr. James E. Folkestad (Volume 16-3, May 2000)
DeRuntz, Dr. Bruce & Mr. John Cooper (Volume 23-2, April 2007)
DeRuntz, Mr. Bruce D. & Dr. Ronald Meier (Volume 20-2, March 2004)
DeRuntz, Mr. Bruce D. (Volume 20-1, November 2003)
DeRuntz, Mr. Bruce D. (Volume 19-4, August 2003)
DeRuntz, Mr. Bruce D. (Volume 19-4, August 2003)
Devine, Dr. Kevin L. (Volume 22-2, April 2006)
Dharavath, Dr. H. Naik (Volume 23-4, October 2007)
Dharavath, Dr. H. Naik (Volume 22-4, October 2006)
Dharavath, Dr. H. Naik, Dr. Ted Bensen & Mr. Bhaskar Gaddam (Volume 21-3, July 2005)
Dhravath, Dr. H. Naik & Dr. Steve Schlough (Volume 21-3, July 2005)
Dharavath, Dr. H. Naik & Dr. Ted Bensen (Volume 20-3, June 2004)
Dharavath, Dr. H. Naik Volume 20-3, June 2004)
Dharavath, Dr. H. Naik (Volume 19-2, March 2003)
Dobbs, Dr. Rita L. (Volume 21-1, January 2005)
Diez, Dr. C. Ray, Mr. Ravindra Thamma, Dr. Luke H. Huang, & Dr. Shi-Jer Lou (Volume 20-3, June 2004)
Dobbs, Dr. Rita L. (Volume 21-1, January 2005)
Doggett, Dr. Anthony Mark (Volume 20-2, February 2004)
Downing, Dr. Craig & Dr. Randall Shaw (Volume 19-1, December 2002)
Duan, Dr. Xin-Ran (Volume 20-2, April 2004)
Duff, Dr. Jon M. (Volume 20-4, November 2004)
Dugger, Dr. John C. & Dr. C. Douglas Ward (Volume 18-3, June, 2002)
Dugger, Dr. John C. & Dr. Tao C. Chang (Volume 17-3, May 2001)
Dugger, Dr. John C. & Dr. Balsy Kasi (Volume 16-4, September, 2000)
Dugger, Dr. John C. & Dr. C. Douglas Ward (Volume 16-4, August, 2000)
Dugger, Dr. John C., Mr. Samson S. Lee, & Dr. Joseph C. Chen (Volume 16-1, November, 1999)
Duvel, Dr. Charles & Dr. Sharon Pate (Volume 20-1, December 2003)
Dunn, Dr. Derrek, Dr. Ji Yao Shen, & Mr. Yun Shen (Volume 23-2, April 2007)
Duvel, Dr. Charles, Dr. Richard Boser & Mr. Tory Ragsdale (Volume 18-3, May 2002)
Dyrenfurth, Dr. Michael J. & Dr. Steven A. Freeman (Volume 20-1, November 2003)
Embleton, Dr. Karla M. & Dr. Steven A. Freeman (Volume 16-4, September, 2000)
Ettaro, Dr. James E. (Volume 16-3, May, 2000)
Faeth, Dr. Loren, Dr. H. Fred Walker & Dr. Teresa J.K. Hall (Volume 15-4, August, 1999)
Field, Dr. Dennis W., Dr. Steven A. Freeman, Ms. Chandra W. Lott, & Dr. Charles V. Schwab (Volume 25-1, January 2009)
Field, Dr. Dennis W. & Mr. Donald Chrusciel (Volume 19-4, August 2003)
Field, Dr. Dennis W. & Dr. Steven A. Freeman (Volume 15-4, August, 1999)
Flowers, Dr. Jim (Volume 15-2, February, 1999)
Folkestad, Dr. James E. & Dr. Michael A. De Miranda (Volume 18-1, December, 2001)
Folkestad, Dr. James E. & Dr. Russell L. Johnson (Volume 17-4, August 2001)
Folkestad, Dr. James E. & Dr. Michael A. DeMiranda (Volume 16-3, May, 2000)
Foster, Mr. Jason (Volume 23-2, June 2007)
Freeman, Dr. Steven A., Dr. Dennis W. Field, Ms. Chandra W. Lott, & Dr. Charles V. Schwab (Volume 25-1, January 2009)
Freeman, Dr. Steven A. & Dr. David Hoffa (Volume 22-3, September 2006)
Freeman, Dr. Steven A. & Dr. Michael J. Dyrenfurth (Volume 20-1, November 2003)
Freeman, Dr. Steven A. & Dr. Karla M. Embleton (Volume 16-4, September, 2000)
Freeman, Dr. Steven A. & Dr. Dennis W. Field (Volume 15-4, August, 1999)
Frey, Dr. Gary & Dr. David Baird (Volume 16-4, September, 2000)
Frisbee, Dr. Robert L., Dr. Brian A. Sandford & Dr. Greg Belcher (Volume 22-4, October 2006)
Frisbee, Dr. Robert L. & Dr. Greg Belcher (Volume 15-3, June, 1999)
-G-
Gaddam, Mr. Bhaskar, Dr. H. Naik Dharavath & Dr. Ted Bensen (Volume 21-3, July 2005)
Gallegos, Ms. Ana & Dr. Edie K. Schmidt (Volume 17-3, May 2001)
Gebken, Dr. Richard, Dr. Shawn Strong, & Dr. Steven McCrary (Volume 25-1, February 2009)
Gilbert, Dr. E. Dean & Mr. Frederick Lee (Volume 24-3, July 2008)
Gillispie, Dr. Cynthia C. (Volume 15-3, May 1999)
Glotzbach, Mr. Ronald J., Mr. Terry L. Burton & Ms. Betty Co (Volume 24-4, October 2008)
Goffnett, Mr. Sean (Volume 20-4, November 2004)
Grise, Dr. William & Dr. Charles Patrick (Volume 19-1, December 2002)
Gupta, Dr. B.C., Dr. M.L. Aggarwal, Dr. S. Roy Chowdhury & Dr. H.F. Walker
(Volume 18-4, August 2002)
Gupta, Dr. Uma A. & Dr. Lynne E. Houtz (Volume 16-4, September 2000)
Hall, Dr. Teresa J.K., Dr. H. Fred Walker, & Dr. Loren Faeth (Volume 15-4, August, 1999)
Harris, Mr. Stephen & Dr. John R. Wright, Jr. (Volume 22-3, August 2006)
Hayden, Dr. Michael A. (Volume 15-1, November, 1998)
Hayes, Mr. Robert & Dr. Ahmad Zargari (Volume 15-4, September, 1999)
Heiser, Mr. David, Mr. Shoji Nakayama & Mr. Fred S. Rice (Volume 20-1, November 2003)
Helsel, Dr. Larry L. (Volume 20-4, September 2004)
Higgins, Dr. Bonnie (Volume 24-3, July 2008)
Hoffa, Dr. David W. & Dr. Chad Laux (Volume 23-4, October 2007)
Hoffa, Dr. David & Dr. Steven A. Freeman (Volume 22-3, September 2006)
Hogan, Dr. R. Lance (Volume 25-1, February 2009)
Hollman, Dr. Kenneth W., Dr. Emily J. Norman Zietz & Dr. Robert G. Colvard (Volume 15-2, March, 1999)
Hong, Dr. Jai W. and Mr. Satit Phitayawejwiwat (Volume 21-1, January 2005)
Hong, Dr. Jai W. & Mr. Chao-Wei Cheng (Volume 20-3, July 2004)
Houston, Dr. Shelton (Volume 17-1, December, 2000)
Houtz, Dr. Lynne E. & Dr. Uma A. Gupta (Volume 16-4, September, 2000)
Hsiung, Dr. Steve C. (Volume 23-3, July 2007)
Hsu, Dr. Tsung Shin, Mr. Chang Lin Yang, & Dr. Chung Yaw Ching (Volume 18-2, February 2002)
Huang, Dr. Bernie P., Dr. Jacob Chen & Dr. Joseph C. Chen (Volume 20-4, November 2004)
Huang, Mr. Bernie P. & Dr. Joseph C. Chen (Volume 16-2, March, 2000)
Huang, Mr. Bernie P., Dr. Joseph C. Chen, & Dr. Chai-Yu Chou (Volume 15-3, June, 1999)
Huang, Dr. Luke H., Mr. Ravindra Thamma, Dr. Shi-Jer Lou, & Dr. C. Ray Diez (Volume 20-3, June 2004)
Huang, Mr. Luke & Dr. Joseph C. Chen (Volume 17-2, February 2001)
Huang, Mr. Luke H., Dr. Joseph C. Chen, Ms. Ashley X. Lan, & Mr. Samson Lee (Volume 15-3, May, 1999)
Huang, Mr. Luke H., Dr. Joseph C. Chen & Dr. Tao Chang (Volume 15-2, March, 1999)
Humphreys, Dr. Michael, Dr. Ronald L. Meier, Dr. Michael Williams, & Mr. John Centko (Volume 15-3, June, 1999)
Izadi, Dr. Mahyar, Dr. Ali Kashef & Dr. Saud H. Al-Sehali (Volume 17-3, May, 2001)
Jetley, Dr. Sudershan (Volume 23-2, April 2006)
Jetley, Dr. Sudershan & Mr. Daniel K. Low (Volume 22-3, July 2006)
Johnson, Dr. M.L., Dr. Steven L. Schaeffer, Ms Jill Slusarski, Ms. Valeria Van Tiem, & Dr. M.L. Johnson (Volume 16-1, November, 1999)
Johnson, Dr. Russell L. & Dr. James E. Folkestad (Volume 17-4, August 2001)
Johnson, Dr. W.C. & Dr. William W. Clyburn Dr. (Volume 17-3, May 2001
-K-
Kashef, Dr. Ali E., Dr. Mahyar Izadi & Dr. Saud H. Al-Sehali (Volume 17-3, May 2001)
Kasi, Dr. Balsy & Dr. John C. Dugger (Volume 16-4, September 2000)
Kelly, Dr. David S. (Volume 21-1, January 2005)
Kennedy, Dr. Edward C. III, Mr. Mike Bishop & Dr. Todd C. Waggoner (Volume 19-2, February 2003)
Kirby, Mr. E. Daniel, Ms. Zhe Zhang & Dr. Joseph C. Chen (Volume 20-4, November 2004)
Kovach, Ms. Jami, Ms. Paris Stringfellow, Ms. Jennifer Turner and Dr. B. Rae Cho (Volume 21-3, July 2005)
Kulatunga, Dr. Athula, CEM, Dr. Randall Shaw & Dr. Mark Nelson (Volume 15-2, March, 1999)
Kulatunga, Dr. Athula CEM (Volume 15-2, February, 1999)
Kuljaca, Dr. Ognjen & Ms. Xiaoping Zhu (Volume 21-2, April 2005)
Latif, Dr. Niaz & Dr. Matthew P. Stephens (Volume 21-2, April 2005)
Lan, Ms. Ashley X., Dr. Joseph C. Chen, Mr. Luke H. Huang, & Mr. Samson Lee (Volume 15-3, May 1999)
Lan, Ms. Xing, Dr. Chien-Pen Chuang, & Dr. Joseph C. Chen (Volume 15-3, May 1999)
Laux, Dr. Chad & Dr. David W. Hoffa (Volume 23-4, October 2007)
Lawless, Mr. Grant W. (Volume 16-4, September 2000)
Le, Mr. Tom K. & Dr. James Yu (Volume 17-1, November 2000)
Lee, Mr. Frederick & Dr. E. Dean Gilbert (Volume 24-3, July 2008)
Lee, Mr. Samson S., Dr. John C. Dugger, & Dr. Joseph C. Chen (Volume 16-1, November 1999)
Lee, Mr. Samson, Dr. Joseph C. Chen, Mr. Luke H. Huang, & Ms. Ashley X. Lan (Volume 15-3, May 1999)
Lee, Ms. Seung-Eun and Dr. Joseph C. Chen (Volume 16-1, December 1999)
Lee, Ms. Shu-Ling & Dr. Shana S-F Smith (Volume 20-4, November 2004)
Leslie, Mr. David, Dr. Steven W. McCrary, Dr. Freddy L. Roberts & Dr. Melvin R. Corley (Volume 23-2, April 2007)
Li, Dr. Ming-Hsien Caleb & Dr. Joseph C. Chen (Volume 17-1, November 2000)
Li, Dr. Ming-Hsien Caleb, Dr. Joseph C. Chen, & Dr. Mike S. Lou (Volume 15-1, November 1998)
Lightner, Dr. Stanley (Volume 15-2, March 1999)
Lingappan, Mr. Anbu, Dr. John W. Sinn, Dr. Todd C. Waggoner and Dr. Angelo D. Brown (Volume 16-1, January, 2000)
Liu, Dr. Hui-Rong, Dr. Chao-Yu Chou, & Dr. Chau-Chen Torng (Volume 15-1, November, 1998)
Liu, Dr. Paul Cheng-Hsin & Mr. Bill D. Bailey (Volume 15-1, November, 1998)
Liu, Mr. Yong-Jin & Chen, Dr. Shian-Fong Chen (Volume 17-4, August, 2001)
Lott, Ms. Chandra, Dr. Steven A. Freeman, Dr. Dennis W. Field, & Dr. Charles V. Schwab (Volume 25-1, January 2009)
Lou, Dr. Mike S., Dr. Joseph C. Chen, & Dr. Caleb M. Li (Volume 15-1, November, 1998)
Lou, Dr. Shi-Jer, Mr. Ravindra Thamma, Dr. Luke H. Huang & Dr. C. Ray Diez (Volume 20-3, June 2004)
Low, Mr. Daniel K. & Dr. Sudershan Jetley (Volume 22-3, July 2006)
Lunsford, Dr. Philip J. II and Ms. Mary Ellen O'Shields (Volume 20-2, March 2004)
Marsh, Dr. Bruce & Dr. Mark Miller (Volume 20-3, June 2004)
Marsh, Dr. Bruce (Volume 19-4, August 2003
Marsh, Dr. Bruce (Volume 18-2, March 2002)
Marsh, Dr. Bruce (Volume 16-4, August 2000
Marshall, Dr. John A. (Volume 17-1, November 2000)
Marshall, Dr. John A. (Volume 16-3, May 2000)
Marshall, Dr. John A. (Volume 15-4, August 1999)
Marshall, Dr. John A. (Volume 15-3, May 1999)
Marshall, Dr. John A. (Volume 15-3, May 1999)
Marshall, Dr. John A. (Volume 15-2, March 1999)
Marshall, Dr. John A. (Volume 15-2, February 1999)
Massiha, Dr. Gholam H. & Dr. Kuldeep S. Rawat (Volume 22-4, October 2006)
Massiha, Dr. Gholam H. & Mr. Kuldeep S. Rawat (Volume 18-2, March 2002)
Maughan, Dr. George R. & Ms. Tracey Anderson (Volume 21-4, October 2005)
McCrary, Dr. Steven, Dr. Richard Gebken, & Dr. Shawn Strong (Volume 25-1, February 2009)
McCrary, Dr. Steven W., Mr. David Leslie, Dr. Freddy L. Roberts & Dr. Melvin R. Corley (Volume 23-2, April 2007)
McCrary, Dr. Steven W., Dr. Dane Paterson & Dr. Shawn Strong (Volume 23-2, April 2007)
McCrary, Dr. Steven W., Mr. Rathel R. (Dick) Smith, & Dr. R. Neal Callahan, (Volume 23-1, January 2007)
McCrary, Dr. Steven W., Dr. R. Neal Callahan, and Mr. Rathel R. Smith (Volume 22-3, Septembr 2006)
McNabb, Dr. Jeff & Dr. Brian B. Balzer (Volume 24-3, July 2008)
McNabb, Dr. Jeff (Volume 19-2, March 2003
Mehta, Dr. Devang (Volume 20-4, November 2004)
Mehta, Dr. Devang (Volume 19-2, February 2003)
Meier, Dr. Ron & Dr. Dan Brown (Volume 24-2, May 2008)
Meier, Dr. Ronald & Dr. Borinara Park (Volume 23-1, January 2007) (
Meier, Dr. Ron & Dr. Dan C. Brown (Volume 21-4, October 2005)
Meier, Dr. Ronald L., Dr. Michael R. Williams and Mr. Rodger B. Singley (Volume 20-2, March 2004)
Meier, Dr. Ronald L. & Mr. Bruce D. DeRuntz (Volume 20-2, March 2004)
Meier, Dr. Ronald L. (Volume 16-4, September 2000)
Meier, Dr. Ronald L., Dr. Michael Williams, Dr. Michael Humphreys, & Mr. John Centko (Volume 15-3, June 1999)
Mellen, Mr. Jason and Dr. Paul Cesarini (Volume 21-2, April 2005)
Miller, Dr. Mark R. & Dr. Bruce Marsh (Volume 20-3, June 2004)
Miller, Dr. Mark R. (Volume 16-3, May 2000)
Miller, Dr. William G. & Dr. Hsi-Kong Chin Wang (Volume 16-1, November 1999)
Minty, Dr. Gordon (Volume 20-1, November 2003)
Mohler, Dr. James L. (Volume 24-1, January 2008)
Mosley, Dr.Ivan T., Sr. (Volume 17-1, December 2000)
Nakayama, Mr. Shoji, Mr. Fred S. Rice & Mr. David P. Heiser (Volume 20-1, November 2003)
Nelson, Dr. Stephanie (Volume 20-2, March 2004)
Obermier, Dr. Timothy R. (Volume 22-4, December 2006)
Obermier, Dr. Timothy R. (Volume 21-1, January 2005)
Obi, Dr. Samuel C. (Volume 15-2, February, 1999)
Oliver, Mr. Garth R. & Dr. Jerry J. Waite (Volume 22-2, April 2006)
Olson, Mr. Darren & Dr. John W. Sinn (Volume 17-2, February, 2001)
Olson Mr. Darren & Dr. John Sinn (Volume 15-4, September, 1999)
O'Shields, Ms. Mary Ellen and Dr. Phillip J. Lunsford II (Volume 20-2, March 2004)
Owens, Dr. James R. (Volume 19-4, August 2003)
Owens, Dr. James R. & Mr. John W. Searles (Volume 19-3, July 2003)
Pandian, Mr. G. and Dr. S. Rama Reddy (Volume 24-2, April 2008)
Park, Dr. Borinara & Dr. Ronald Meier (Volume 23-1, January 2007) (
Pate, Dr. Sharon & Dr. Charles Duvel (Volume 20-1, December 2003)
Patrick, Dr. Charles & Dr. William Grise (Volume 19-1, December 2002)
Patrick, Dr. Charles & Dr. Ahmad Zargari (Volume 18-1, November, 2001)
Patrick, Dr. Charles & Dr. Ahmad Zargari (Volume 15-1, November, 1998)
Pecen, Dr. Recayi, Dr. MD Salim & Mr. Ayhan Zora (Volume 20-3, July 2004)
Pecen, Dr. Recayi & Dr. Marc Timmerman (Volume 17-2, March, 2001)
Pecen, Dr. Recayi, Dr. MD Salim & Dr. Marc Timmerman (Volume 16-3, May, 2000)
Peterson, Dr. Dane, Dr. Steven W. McCrary, & Dr. Shawn Strong (Volume 23-2, April 2007)
Petroni, Dr. Alberto & Dr. Marcello Braglia (Volume 15-4, September, 1999)
Phitayawejwiwat, Mr. Satit & Dr. Jai W. Hong (Volume 21-1, January 2005)
Pipkins, Mr. Darren & Dr. Mandara Savage (Volume 22-3, August 2006)
Rabiee, Dr. Massoud Maxwell (Volume 15-2, February, 1999)
Rawat, Dr. Kuldeep S. & Dr Gholam H. Massiha (Volume 22-4, October 2006)
Rawat, Mr. Kuldeep S. Rawat & Dr. Gholam H. Massiha (Volume 18-2, March 2002)
Reddy, Dr. S. Rama and Mr. G. Pandian (Volume 24-2, April 2008)
Reifschneider, Dr. Louis (Volume 21-4, October 2005)
Reifschneider, Dr. Louis (Volume 16-3, May 2000)
Rice, Mr. Fred S., Mr. Shoji Nakayama & Mr. David P. Heiser (Volume 20-1, November 2003)
Rodchua, Dr. Suhansa, Mr. Terry Bilke, Ms. Jingqing Xia, Mr. Bill D. Bailey, and Dr. John Sinn (Volume 22-4, October 2006)
Rodchua, Dr. Suhansa (Volume 22-4, October 2006)
Rodchua, Ms. Suhansa & Dr. Ronald Woolsey (Volume 20-4, December 2004)
Rogers, Ms. Marla P. (Volume 18-2, February 2002)
Salim, Dr. MD, Pecen, Dr. Recayi, & Mr. Ayhan Zora (Volume 20-3, July 2004)
Salim, Dr. MD, Mr. Alvaro Villavicencio & Dr. Marc A. Timmerman (Volume 19-1, November 2002)
Salim, Dr. MD, Dr. Recayi Pecen & Dr. Marc A. Timmerman (Volume 16-3, May, 2000)
Sandford, Dr. Brian A., Dr. Robert L. Frisbee, & Dr. Gregory G. Belcher (Volume 22-4, October 2006)
Sartorius, Ms. Ute (Volume 16-2, March, 2000)
Savage, Dr. Mandara and Mr. Darren Pipkins (Volume 22-3, August 2006)
Savage, Dr. Mandara D. & Dr. Joseph C. Chen (Volume 15-4, September, 1999)
Scarborough, Dr. Jule Dee (Volume 18-2, February, 2002)
Scarborough, Dr. Jule Dee (Volume 17-2, April, 2001)
Scarcella, Dr. Joseph & Dr Rodney L. Custer (Volume 15-1, November, 1998)
Schaeffer, Dr. Steven L., Ms. Jill Slusarski, Ms. Valeria VanTiem, and Dr. M.L. Johnson (Volume 16-1, November, 1999)
Schlough, Dr. Steve & Dr. H. Naik Dhravath (Volume 21-3, July 2005)
Schmidt, Dr. Edie K. & Ms. Ana Gallegos (Volume 17-3, May, 2001)
Schmidt, Dr. Klaus, Dr. Daniel G. Wilson and Mr. Michael Signor (Volume 21-1, January 2005)
Schmidt, Dr. Klaus, Dr. Dan Brown & Dr. Rodney L. Custer (Volume 20-4, September 2004)
Schmidt, Dr. Klaus (Volume 18-2, February 2002)
Schwab, Dr. Charles V., Dr. Steven A. Freeman, Dr. Dennis W. Field, & Ms. Chandra W. Lott (Volume 25-1, January 2009)
Schwagerman, Mr. William C. & Dr. Jeff Ulmer (Volume 25-1, January 2009)
Scott, Dr. Sophia & Dr. Greg Boyd (Volume 24-4, December 2008)
Scott, Dr. Sophia (Volume 23-4, November 2007)
Searles, Mr. John W. & Dr. James R. Owens (Volume 19-3, July 2003)
Shaw, Dr. Randall & Dr. Craig Downing (Volume 19-1, December 2002)
Shaw, Dr. Randall, Dr. Athula Kulatunga, CEM & Dr. Mark Nelson (Volume 15-2, March 1999)
Shen, Dr. Ji Yao, Dr. Derrek Dunn, & Mr. Yun Shen (Volume 23-2, April 2007)
Shen, Mr. Yun, Dr. Ji Yao Shen & Dr. Derrek Dunn (Volume 23-2, April 2007)
Signor, Mr. Michael, Dr. Daniel G. Wilson and Dr. Klaus Schmidt (Volume 21-1, January 2005)
Singley, Mr. Rodger B., Meier, Dr. Ronald L., & Dr. Michael R. Williams (Volume 20-2, March 2004)
Sinn, Dr. John W., Mr. Terry Bilke, Ms. Jingqing Xia, Mr. Bill D. Bailey, and Dr. Suhansa Rodchua (Volume 22-4, October 2006)
Sinn, Dr. John W., Dr. Paul Cesarini & Mr. Terence Armentano (Volume 22-4, October 2006)
Sinn, Dr. John W. (Volume 20-1, November 2003)
Sinn, Dr. John W. & Mr. Darren Olson (Volume 17-2, February 2001)
Sinn, Dr. John W. (Volume 17-1, November 2000)
Sinn, Dr. John W., Lingappan, Mr. Anbu, Dr. Todd C. Waggoner & Dr. Angelo D. Brown (Volume 16-1, January 2000)
Sinn, Dr. John & Mr. Darren Olson (Volume 15-4, September 1999)
Slusarski, Ms. Jill, Dr. Steven L. Schaeffer, Ms. Valeria VanTiem, & Dr. M.L. Johnson (Volume 16-1, November, 1999)
Smallwood, Dr. James E. & Dr. Ahmad Zargari (Volume 16-3, June, 2000)
Smith, Mr. Rathel R., Dr. R. Neal Callahan & Dr. Martin Jones (Volume 24-4, December 2008)
Smith, Mr. Rathel R. (Dick), Dr. Steven W. McCrary, & Dr. R. Neal Callahan, (Volume 23-1, January 2007)
Smith, Mr. Rathel R., Dr. Steven W. McCrary, and Dr. R. Neal Callahan (Volume 22-3, Septembr 2006)
Smith, Mr. Rathel R., Dr. Neal Callahan, and Dr. Shawn S. Strong (Volume 21-3, August 2005)
Smith, Dr. Roger & Dr. Shawn Strong (Volume 18-1, December, 2001)
Smith, Dr. Shana S-F & Ms. Shu-Ling Lee (Volume 20-4, November 2004)
Smith, Dr. Shana Shiang-Fong & Dr. Qiang Su (Volume 19-2, March 2003)
Song, Dr. Xueshu, Dr. Rada Balamuralikrishna, & Dr. Ragu Athinarayanan (Volume 16-3, May, 2000)
Spoerre, Dr. Julie K., Mr. Timothy Stich and Dr. Tomas Velasco (Volume 16-1, January, 2000)
Sriraman, Dr. Vedaraman & Dr. John De Leon (Volume 15-3, May, 1999)
Stephens, Dr. Matthew P. & Dr. Niaz Latif (Volume 21-2, April 2005)
Stich, Mr. Timothy, Dr. Julie K. Spoerre and Dr. Tomas Velasco (Volume 16-1, January, 2000)
Stier, Dr. Kenneth W. (Volume 24-2, May 2008)
Steir, Dr. Kenneth W. (Volume 22-2, April 2006)
Stier, Dr. Kenneth W. Stier and Dr. Richard Boser (Volume 21-2, April 2005)
Stier, Dr. Kenneth (Volume 19-4, August 2003)
Stier, Dr. Kenneth & Dr. Ryan Brown (Volume 18-1, December, 2001)
Stier, Dr. Kenneth & Dr. Ryan Brown (Volume 17-1, December, 2000)
Stier, Dr. Kenneth W. & Dr. Gary D. Weede (Volume 15-1, November, 1998)
Strandberg, Dr. Gene (Volume 18-2, February 2002)
Stringfellow, Ms. Paris, Ms. Jami Kovach, Ms. Jennifer Turner and Dr. B. Rae Cho (Volume 21-3, July 2005)
Strong, Dr. Shawn, Dr. Richard Gebken, & Dr. Steven McCrary (Volume 25-1, February 2009)
Strong, Dr. Shawn, Dr. Steven W. McCrary, & Dr. Dane Paterson (Volume 23-2, April 2007)
Strong, Dr. Shawn, Dr. Neal Callahan, and Mr. Rathel R. Smith (Volume 21-3, August 2005)
Strong, Dr. Shawn S., Dr. R. Neal Callahan and Dr. Scott J. Amos (Volume 20-4, September 2004)
Strong, Dr. Shawn S., Dr. Scott J. Amos and Dr. Neal R. Callahan (Volume 19-3, May 2003)
Strong, Dr. Shawn S. & Dr. Lesta A. Burgess Dr. (Volume 19-3, May 2003)
Strong, Dr. Shawn & Dr. Roger Smith (Volume 18-1, December, 2001)
Su, Dr. Qiang & Dr. Shana Shiang-Fong Smith (Volume 19-2, March 2003)
Sutton, Dr. Mathias J. (Volume 18-3, May, 2002)
Temple, Mr. Richard (Volume 20-1, November 2003)
Temple, Mr. Richard & Mr. Terry Adams (Volume 16-2, March, 2000)
Thamma, Mr. Ravindra, Dr. Luke H. Huang, Dr. Shi-Jer Lou & Dr. C. Ray Diez (Volume 20-3, June 2004)
Timmerman, Dr. Marc A., Salim, Dr. MD Salim & Mr. Alvaro Villavicencio (Volume 19-1, November 2002)
Timmerman, Dr. Marc & Dr. Recayi Pecen (Volume 17-2, March 2001)
Timmerman, Dr. Marc, Dr. Recayi Pecen, & Dr. MD Salim (Volume 16-3, May 2000)
Tisdale, Mr. Eric (Volume 16-1, November 1999)
Toppen, Dr. James L. (Volume 20-1, November 2003)
Torng, Dr. Chau-Chen, Dr. Chao-Yu Chou, & Dr. Hui-Rong Liu (Volume 15-1, November, 1998)
Treml, Dr. George J. and Dr. John Edward Wyatt (Volume 22-1, January 2006)
Treml, Dr. George T, & Dr. John Edward Wyatt (Volume 22-3, July 2006)
Turner, Ms. Jennifer, Ms. Jami Kovach, Ms. Paris Stringfellow, and Dr. B. Rae Cho (Volume 21-3, July 2005)
Ulmer, Dr. Jeff & Mr. William C. Schwagerman (Volume 25-1, January 2009)
Uma, Mr. Awa (Volume 20-2, March 2004)
Vahradian, Dr. Haig and Dr. John Wright, Jr. (Volume 22-1, January 2006)
VanTiem, Ms. Valeria, Dr. Steven L. Schaeffer, Ms Jill Slusarski, and Dr. M.L. Johnson (Volume 16-1, November, 1999)
Velasco, Dr. Tomas, Mr. Timothy Stich and Dr. Julie K. Spoerre (Volume 16-1, January, 2000)
Villavicencio, Mr. Alvaro, Dr. MD Salim & Dr. Marc A. Timmerman (Volume 19-1, November 2002)
Wagner, Mr. Jerry (Volume 15-1, November, 1998)
Waggoner, Dr. Todd C., Mr. Mike Bishop & Dr. Edward C. Kennedy III (Volume 19-2, February 2003)
Waggoner, Dr. Todd C., Lingappan, Mr. Anbu, Dr. John W. Sinn, and Dr. Angelo D. Brown (Volume 16-1, January, 2000)
Waite, Dr. Jerry J. (Volume 22-4, October 2006)
Waite, Dr. Jerry J. & Mr. Garth R. Oliver (Volume 22-2, April 2006)
Walker, Dr. Earnest L., & Mr. Bruce Cox (Volume 15-3, May, 1999)
Walker, Dr. H. Fred & Mr. Michael L. Cadorette (Volume 22-2, June 2006)
Walker, Dr. H.F., Dr. S. Roy Chaudhury, Dr. M.L. Aggarwal, & Dr. B.C. Gupta (Volume 18-4, August 2002)
Walker, Dr. H. Fred, Dr. Teresa J.K. Hall, & Dr. Loren Faeth (Volume 15-4, August, 1999)
Walker, Dr. H. Fred CQE, CQA, CSIT (Volume 15-2, February, 1999)
Wang, Dr. Hsi-Kong Chin & Dr. William G. Miller (Volume 16-1, November, 1999)
Ward, Dr. C. Douglas & Dr. John C. Dugger (Volume 18-3, June, 2002)
Ward, Dr. C. Douglas & Dr. John C. Dugger (Volume 16-4, August, 2000)
Weede, Dr. Gary D. & Dr. Kenneth W. Stier (Volume 15-1, November, 1998)
Wiewandt, Mr. Frank & Cesarini, Dr. Paul (Volume 22-3, July 2005)
Williams, Dr. Michael R., Dr. Ronald L. Meier and Mr. Rodger B. Singley (Volume 20-2, March 2004)
Williams, Dr. Michael R., Dr. Ronald L. Meier, Dr. Michael Humphreys, & Mr. John Centko (Volume 15-3, June, 1999)
Wilson, Dr. Daniel G., Mr. Michael Signor and Dr. Klaus Schmidt (Volume 21-1, January 2005)
Wilson, Dr. Dru M. (Volume 19-2, February 2003)
Woolsey, Dr. Ronald & Ms. Suhansa Rodchua (Volume 20-4, December 2004)
Wright, Dr. John R., Jr. & Mr. Stephen Harris Volume 22-3, August 2006)
Wright, Dr. John R., Jr. (Volume 22-2, June 2006)
Wright, Dr. John, Jr. & Dr. Haig Vahradian (Volume 22-1, January 2006)
Wright, Dr. John R. Jr. (Volume 15-4, August, 1999)
Wyatt, Dr. John Edward & Dr. George J. Treml (Volume 22-3, July 2006)
Wyatt, Dr. John Edward & Dr. George J. Trmal (Volume 22-1, January 2006)
-X-
-Y-
Yang, Mr. Chang Lin, Dr. Tsung Shin Hsu & Dr. Chung Yaw Ching (Volume 18-2, February 2002)
Yang, Dr. John L. & Dr. Joseph C. Chen (Volume 17-2, March 2001)
Yu, Dr. James & Mr. Tom Le (Volume 17-1, November, 2000)
Zanella, Dr. Deborah J. (Volume 15-4, August, 1999)
Zargari, Dr. Ahmad & Dr. Charles Patrick (Volume 18-1, November, 2001)
Zargari, Dr. Ahmad & Dr. James E. Smallwood (Volume 16-3, June, 2000)
Zargari, Dr. Ahmad & Mr. Robert Hayes (Volume 15-4, September, 1999)
Zargari, Dr. Ahmad & Dr. Charles E. Coddington (Volume 15-2, March, 1999)
Zargari, Dr. Ahmad & Dr. Charles Patrick (Volume 15-1, November, 1998)
Zhang, Ms. Zhe, Mr. E. Daniel Kirby & Dr. Joseph C. Chen (Volume 20-4, November 2004)
Zhu, Ms. Xiaoping & Dr. Ognjen Kuljaca (Volume 21-2, April 2005)
Zietz, Dr. Emily J., Dr. Kenneth W. Hollman & Dr. Robert G. Colvard (Volume 15-2, March, 1999)
Zora, Mr. Ayhan, Pecen, Dr. Recayi, & Dr. MD Salim (Volume 20-3, July 2004)
-A-
"Ergonomic Analysis of a Multi-Task Industrial Lifting Station Using the NIOSH Method"
"Interaction Graphs for a Two-Level Combined Array Experiment Design"
"ERP: The Primary Solution Provider for Industrial Companies"
"Electronic Commerce: An Introduction (Book Review)"
"Enhancing Entry Level Skills in Quality Assurance: An Industry Perspective"
"Effective Assessment: A Model for Industrial Technology Programs"
"Linking TQM Culture to Traditional Learning Theories"
"Distance Education at Bowling Green State University: Challenge, Opportunities and Promise"
"The Relevance of Concurrent Engineering in Industrial Technology Programs"
-B-
"Quality Model in Web-Based Distance Learning: A Case Study"
"Electronics Manufacturing Company Hand Assembly Productivity Improvement"
"Does Rapid Prototyping Improve Student Visualization Skills?"
"The Relevance of Concurrent Engineering in Industrial Technology Programs"
"Significant Effect of Microwave Curing on Tensile Strength of Carbon Fiber Composites"
"Assessment of Initial Awareness Knowledge and Sources of Influence Leading to Enrollment Decisions for Students Entering Four-Year Automotive Programs"
"What Influences Students to Attend Four-Year Automotive Programs"
"Analysis of Print Attributes of Amplitude Modulated (AM) vs. Frequency Modulated (FM) Screening of Multicolor Offset Printing"
"Graphic Communications Management Program Assessment: A Survey of GCM Alumni on the Curriculum"
"Quality Model in Web-Based Distance Learning: A Case Study"
"Determining if Destructive Testing Can be Reduced by Using Pre-Yield Strength Data in Analysis of Composite Reinforced Automotive Hood Assemblies"
"Technology and Practice in a Historical Context: Building the Civil War Submarine 'Pioneer' (Non-Refereed Article)"
"Implementation of Program Assessment in a Technical Department"
"Recycled Foam and Cement Composites in Insulating Concrete Forms"
"Unsuitable Job for a Women? Women at Work, Status and Issues"
"A Case Study of a Project Course Developed to Close Competency Gaps in an Industrial Technology Program"
"Organizing and Managing Successful Technical Presentations"
"A Management-Support Technique for the Selection of Rapid Prototyping Technologies"
"Developing Online Templates for ISO 9000-Based Standard Operating Procedures"
"An Exploratory Study to Identify a Common Managerial/Professional Core Curriculum for NAIT Baccalaureate Programs"
"Industrial Technology Program Enhancement: The Importance of Strategic Planning"
"A National Benchmark Study of Computer Technology-related Programs in Industrial Technology"
"Selecting Rapid Prototyping Systems"
"Integrating Rapid Prototyping Technology into the Curriculum"
"Trends in Online Education: Case Study at Southwest Missouri State University"
Burton, Mr. Terry L., Mr. Ronald J. Glotzbach & Ms. Betty Co (Volume 24-4, October 2008)
"Online Instructor Evaluations: A Web-Based Application"
"Characterizing Productivity of a 4kW CO2 Laser Cutting System for 0.25" Mild Steel Using Central Composite Methodology"
"Developing Maximum Career Potential in Manufacturing Technology Curricula"
"Gauge Repeatability and Reproducibility Studies and Measurement Analysis: A Multimethod Exploration of the State of Practice"
"Comparative Analysis between Manufacturing and Construction Enterprises on the Use of Formalized Quality Programs"
"Developing a Practical Quality System to Improve Visual Inspections"
"Enhancing Entry Level Skills in Quality Assurance: An Industry Perspective"
"Effective Assessment: A Model for Industrial Technology Programs"
"An Exploratory Study to Assess Competency Gaps in Science, Mathematics, Engineering, and Technological (SMET) Education">
"Distance Education at Bowling Green State University: Challenge, Opportunities and Promise"
"A Digital Dilemma: File Preparation for Archival Storage"
"Challenges Ahead for Adobe's Portable Document Format"
"Contextualizing Digital Rights Management: Past, Present and Future"
"An Examination of the Graduation Rates and Enrollment Trends in Industrial Technology Baccalaureate Programs from 1988-1998"
"Effect of Tool/Chip Contact Length on Orthogonal Turning Performance"
"Plasma Surface Treatment In Composites Manufacturing"
"Interaction Graphs for a Two-Level Combined Array Experiment Design"
"A BCS Framework for Air Cargo Terminal Design: Procedure and Case Study"
"Integration of Product and Process Development Using Rapid Prototyping and Workcell Simulation Technologies"
"Testing a New Curriculum for Design for Manufacturability (DFM) in Technical Education"
"Testing a New Approach for Learning Teamwork Knowledge and Skills in Technical Education"
"QFD-based Technical Textbook Evaluation - Procedure and a Case Study"
"Testing a New Curriculum for Design for Manufacturability (DFM) in Technical Education"
"Development of an Accelerometer-Based Surface Roughness Prediction System in Turning Operations Using Multiple Regression Techniques"
"Testing a New Approach for Learning Teamwork Knowledge and Skills in Technical Education"
"QFD-based Technical Textbook Evaluation - Procedure and a Case Study"
"A Systematic Approach for Identifying Optimum Surface Roughness Performance in End-Milling Operations"
"A Multiple Regression Model to Predict In-process Surface Roughness in Turning Operation Via Accelerometer"
"Determining Process Mean for Machining While Unbalanced Tolerance Design Occurs
"Neural Network-Based Tool Breakage Monitoring System for End Milling Operations"
"Mass-Customization Methodology for an Apparel Industry with a Future"
"Kaizen: An Essential Tool for Inclusion in Industrial Technology Curricula"
"Effects of Tool Diameter Variations in On-Line Surface Roughness Recognition System"
"Issues in Information Ethics and Educational Policies for the Coming Age"
"A Statistical Approach in Detecting Tool Breakage in End Milling Operations"
"A Systematic Procedure for Designing State Combination Circuits in PLCs"
"Analysis of an Effective Sensing Location for an In-process Surface Recognition System in Turning Operations"
"Effect of Tool/Chip Contact Length on Orthogonal Turning Performance"
"Surface Roughness Prediction Technique for CNC End-Milling"
"Surface Roughness Prediction Technique for CNC End-Milling"
"The Application of
Multi-Level Genetic Algorithms in Assembly Planning"
"The Linkage of Partnership in American Automotive Industry Supply Chain Management"
"Integration of Product and Process Development Using Rapid Prototyping and Workcell Simulation Technologies"
"Matching Military Occupations and Experience to Academic Preparation in Industrial Technology"
"Translating CCAF AAS Degree Programs"
"Disseminating, Archiving, and Retrieving New Knowledge in Industrial Technology: Implications for the Discipline and NAIT"
"Integrating the Thinking Process into the Product Design Chain"
"The House of Competitiveness: The Marriage of Agile Manufacturing, Design for Six Sigma, and Lean Manufacturing with Quality Considerations"
"A Statistical Approach in Detecting Tool Breakage in End Milling Operations"
"Applying Quality Engineering Technique to Improve Wastewater Treatment"
"A BCS Framework for Air Cargo Terminal Design: Procedure and Case Study"
"From Critical Success Factors into Criteria for Performance Excellence - An Organizational Change Strategy"
"Issues in Information Ethics and Educational Policies for the Coming Age"
"A Systematic Procedure for Designing State Combination Circuits in PLCs"
"A Status Report on the Use of Distance Learning in Industrial Technology"
"Online Instructor Evaluations: A Web-Based Application"
"Key Characteristics of Industrial Technology Faculty: A National Survey of NAIT Accredited IT Programs"
"A Progress Report on Y2K"
"The Relationship Between the Workpiece Extension Length/Diamater Ratio and Surface Roughness in Turning"
"Validation of Project Time Decision-Support Tools and Processes"
"Technological Applications of Solid Modeling and Parametric Features"
"Attitude of Electronics Technology Majors at Indiana State University Toward Mathematics"
"The Evolution of Student Internships in Industry"
"A National Benchmark Study of Computer Technology-related Programs in Industrial Technology"
"Competencies Identified as Important for 21st Century Plastering Contractors - A Rotational Delphi"
-D-
"A Case Study of How to Incorporate Cross-Functional Components in Industrial Technology Education: Safety Metrics in the Classroom"
"Teaching Geometric Dimensioning and Tolerancing in a Manufacturing Program"
"Impact of Screen-Capture Based Instruction on Student Comprehension of Computer Aided Design (CAD) Software Principles"
"Industrial Advisory Committee....or Action Committee?"
"The Relationship Between the Workpiece Extension Length/Diamater Ratio and Surface Roughness in Turning"
"Assessing the Professional Development Needs of NAIT's Industry Division Members"
"Preparing to Meet Industry's Demand for Dimensional Metrology Trained Industrial Technologists"
"Assessing the Benefits of Surface Tension Transfer Welding to Industry"
"Assessing the Value of Short Term International Experience for Industrial Technology Educators"
"Improving the Knowledge Transfer Skills of Industrial Technology Students"
"Analysis of Color Image Difference on the Monitor vs. Printer in a Color Managed Workflow"
"Analysis of Newsprint Color Reproduction within the Newspaper Association of America Solid Ink Density and Color Gamut Standards"
"Analysis of Print Attributes of Amplitude Modulated (AM) vs. Frequency Modulated (FM) Screening of Multicolor Offset Printing"
"Telecommunication Systems Program Evaluation: A Survey of TCS Alumni on the Curriculum" (Non-Refereed)
"Graphic Communications Management Program Assessment: A Survey of GCM Alumni on the Curriculum"
"Identification of the Skills Needed by Workers in Various Segments of the Graphic Communications Industry"
"Importance of Technical Competencies in the Graphic Communications Technology Curriculum as Perceived by the Graphic Communications Industry and Educators"
"An Experimental Study of the Impact of Training on Faculty Concerns"
"Controlling Robot Through Internet Using Java"
"An Experimental Study of the Impact of Training on Faculty Concerns"
"A Statistical Comparison of Three Root Cause Analysis Tools"
"The Status of Industrial Interaction/Outreach in Industrial Technology"
"A Model Curriculum for Computer Aided Design (CAD) Associate Degree Programs"
"Outcomes Assessment Across Multiple Accreditation Agencies"
"A Comparison of Selected Categories of Accreditation Standards of NAIT, ABET and AACSB"
"An Examination of the Graduation Rates and Enrollment Trends in Industrial Technology Baccalaureate Programs from 1988-1998"
"Gender Equity in Industrial Technology: The Challenge and Recommendations"
"The Impacts of Quality Improvement Training on Fear/Anxiety in Organizations"
"Kaizen: An Essential Tool for Inclusion in Industrial Technology Curricula"
"Computer Knowledge Report from a Student Self-Evaluation"
"Challenges Facing U.S. Manufacturing and Strategies (Non-Refereed)"
"Recycled Foam and Cement Composites in Insulating Concrete Forms"
"Using Peer Assessments in Team Activities"
-E-
"Enhancing a Residential Safety Course with the Development of an Online Component: A Limited Case Study"
"Assessing Individual Student Performance in Teams"
-F-
"Staying Competitive: Links to Manufacturing Technology Networks"
"Evaluation of the Safety Content in the NAIT Certification Exam"
"From Critical Success Factors into Criteria for Performance Excellence - An Organizational Change Strategy"
"Benefits of a Cross-Functional Safety Curriculum"
"An Outline for the Study of Using Technology"
"Impact of Screen-Capture Based Instruction on Student Comprehension of Computer Aided Design (CAD) Software Principles"
"Resolving the Conflict between Design and Manufacturing: Integrated Rapid Prototyping and Rapid Tooling (IRPRT)"
"Industrial Advisory Committee....or Action Committee?"
"Journey to a Flexible, Reliable Laboratory Platform for Simultaneous Control of Multiple Reactive Power Devices"
"Evaluation of the Safety Content in the NAIT Certification Exam"
"Reducing Student Writing Time and Instructor Grading Time of Laboratory Reports"
"Using Peer Assessments in Team Activities"
"Enhancing a Residential Safety Course with the Development of an Online Component: A Limited Case Study"
"Benefits of a Cross-Functional Safety Curriculum"
"Does Rapid Prototyping Improve Student Visualization Skills?"
"Assessment of Initial Awareness Knowledge and Sources of Influence Leading to Enrollment Decisions for Students Entering Four-Year Automotive Programs"
"What Influences Students to Attend Four-Year Automotive Programs"
"Analysis of Print Attributes of Amplitude Modulated (AM) vs. Frequency Modulated (FM) Screening of Multicolor Offset Printing"
"Distance Learning: Issues and Concerns of Distance Learners"
"Research Publication Trends and Topics in the Journal of Industrial Technology"
"Flexographic Plate Technology: Conventional Solvent Plates versus Digital Solvent Plates"
"A Study of Computer-Mediated Communication to be Used for Classroom Instruction"
"Online Instructor Evaluations: A Web-Based Application"
"Understanding Six Sigma: Implications for Industry and Education"
"Passive Solar Lighting Using Fiber Optics"
"Interaction Graphs for a Two-Level Combined Array Experiment Design"
"High School Students' Perceptions of Information Technology Skills and Careers" (Volume 16-4, September, 2000)
-H-
"Staying Competitive: Links to Manufacturing Technology Networks"
"The Value of Partnering with Academia (Non-Refereed)"
"The Industrial Front-Line Supervisor and Work Place Laws Related to Civil Rights"
"An Analysis of Industrial Technology (IT) Programs in Meeting Students Needs: A Survey of IT Alumni"
"The Accommodating Workplace: Making Room for Sensory Disabled Employees (Non-Refereed Article)"
"A Code of Ethics for Industrial Technology (Non-Refereed Article)"
"Program Evaluation: Utilizing Graduate and Employer Perception Data in Determining Graduates' Job Preparedness Levels"
"Gauge R&R: An Effective Methodology for Determining the Adequacy of a New Measurement System for Micron-level Metrology"
"Reducing Student Writing Time and Instructor Grading Time of Laboratory Reports"
"Assessment of Technology Graduate Students’ Learning Preference Styles Utilizing the Myers-Briggs Type Indicator"
"A Progress Report on Y2K"
"The Impact of ISO 9000 Certification on Quality Management Practices in Thailand"
"The Linkage of Partnership in American Automotive Industry Supply Chain Management"
"Surface Mount Technology Market Forecasting"
"High School Students' Perceptions of Information Technology Skills and Careers"
"The Use of PIC Microcontrollers in Multiple DC Motors Control Applications"
"Integrating the Thinking Process into the Product Design Chain"
"Testing a New Curriculum for Design for Manufacturability (DFM) in Technical Education"
"Neural Network-Based Tool Breakage Monitoring System for End Milling Operations"
"A Statistical Approach in Detecting Tool Breakage in End Milling Operations"
"Controlling Robot Through Internet Using Java"
"A Multiple Regression Model to Predict In-process Surface Roughness in Turning Operation Via Accelerometer"
"Analysis of an Effective Sensing Location for an In-process Surface Recognition System in Turning Operations"
"Effect of Tool/Chip Contact Length on Orthogonal Turning Performance"
"An Exploratory Study to Assess Competency Gaps in Science, Mathematics, Engineering, and Technological (SMET) Education">
-I-
"ERP: The Primary Solution Provider for Industrial Companies"
-J-
"Martempering to Improve Wear Properties of Aircraft Brake Steel Rotors"
"A Rapid Tooling Technique Using a Low Melting Point Alloy for Plastic Injection Molding""Tensile Strength Comparison of Athletic Tapes: Assessed Using ASTM D3759M-96, Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes"
"Resolving the Conflict between Design and Manufacturing: Integrated Rapid Prototyping and Rapid Tooling (IRPRT)"
"A Status Report on the Use of Distance Learning in Industrial Technology"
Jones, Dr. Martin, Dr. R. Neal Callahan & Mr. Rathel R. Smith (Volume 24-4, December 2008)
"Developing Maximum Career Potential in Manufacturing Technology Curricula"
"ERP: The Primary Solution Provider for Industrial Companies"
"Gender Equity in Industrial Technology: The Challenge and Recommendations"
"Team Design Problem in Technology" (Volume 21-1, January 2005)
Dr. David S. Kelley
Kelly, Dr. David S. (Volume 18-1, November 2001)
"Web-Centric Product Data Management"
"Determining if Destructive Testing Can be Reduced by Using Pre-Yield Strength Data in Analysis of Composite Reinforced Automotive Hood Assemblies"
"Development of an Accelerometer-Based Surface Roughness Prediction System in Turning Operations Using Multiple Regression Techniques"
"The House of Competitiveness: The Marriage of Agile Manufacturing, Design for Six Sigma, and Lean Manufacturing with Quality Considerations"
"NAIT Demographics Study - 1997"
"Improving Students' Conceptual Understanding of Electrical and Electronics Circuits Via Computer-Based Review Sessions"
"A Short Preview of Free Statistical Software Packages for Teaching Statistics to Industrial Technology Majors"
-L-
"A Cross-Disciplinary Biotechnology Initiative: A New Frontier for Industrial Technology (Non-Refereed Article)"
"Analysis of an Effective Sensing Location for an In-process Surface Recognition System in Turning Operations"
"A Systematic Procedure for Designing State Combination Circuits in PLCs"
"Gauge R&R: An Effective Methodology for Determining the Adequacy of a New Measurement System for Micron-level Metrology"
"Information Technology for Manufacturing: Where Has It Been, Where Is It Heading?"
"Internet and Network Security"
"Flexographic Plate Technology: Conventional Solvent Plates versus Digital Solvent Plates"
"Kaizen: An Essential Tool for Inclusion in Industrial Technology Curricula"
"Analysis of an Effective Sensing Location for an In-process Surface Recognition System in Turning Operations"
"Mass-Customization Methodology for an Apparel Industry with a Future"
"A Pilot Study for Integrating Virtual Reality into an Introductory Design and Graphics Course"
"Validation of Project Time Decision-Support Tools and Processes"
"Determining Process Mean for Machining While Unbalanced Tolerance Design Occurs
"Surface Roughness Prediction Technique for CNC End-Milling"
"A Comparison of the Effectiveness of Applied and Traditional Mathematics Curriculum"
>
"Developing Online Templates for ISO 9000-Based Standard Operating Procedures"
"Applying Quality Engineering Technique to Improve Wastewater Treatment"
"Electronics Manufacturing Company Hand Assembly Productivity Improvement"
"The Application of
Multi-Level Genetic Algorithms in Assembly Planning"
"Evaluation of the Safety Content in the NAIT Certification Exam"
"Surface Roughness Prediction Technique for CNC End-Milling"
"Controlling Robot Through Internet Using Java"
"A Rapid Tooling Technique Using a Low Melting Point Alloy for Plastic Injection Molding"
"WebDAV: A Web-Writing Protocol and More"
-M-
"Dimensional Metrology: A Perspective on Structure and Lab Integration"
"Energy and Power Technology: A Perspective for the 21st Century"
"A Consolidated Approach to Productivity Assessment"
"Integrating Spreadsheet Templates and Data Analysis into Fluid Power Instruction"
"Understanding E-Mail Delivery"
"Focus on Industry for Success"
"Internet Service Providers: A Method for Selection"
"Computer Crimes: How to Avoid Falling Victim"
"Professional Internships as a Requirement for Graduation"
"Maximizing Your Industrial Advisory Board"
"Internet Crimes Encountered By Novice Surfers"
"A Study of Magneto-Resistive Read-Write Head Reliability Using Low-Frequency Noise Measurement Technique"
"Investigating Electrical Noise Signals in Metal Thin Films with Different Geometry"
"Linking TQM Culture to Traditional Learning Theories"
"Research Publication Trends and Topics in the Journal of Industrial Technology"
"Validation of Project Time Decision-Support Tools and Processes"
"Service-Learning in an Introductory Course in Construction Management"
"Gauge Repeatability and Reproducibility Studies and Measurement Analysis: A Multimethod Exploration of the State of Practice"
"Comparative Analysis between Manufacturing and Construction Enterprises on the Use of Formalized Quality Programs"
"Significant Effect of Microwave Curing on Tensile Strength of Carbon Fiber Composites"
"A Reading List for Establishing a Base of Knowledge for Technology Management: A Delphi Study"
"A Study of Quality Differences between Waterless and Conventional Litho Printing"
"An Investigation of the Perceived Financial Performance of Commercial Printing Firms for Conducting B2C Activities Using Web Technology"
"An Exploratory Study to Identify a Common Managerial/Professional Core Curriculum for NAIT Baccalaureate Programs"
"Reality-Based Construction Project Management: A Constraint-Based 4D Simulation Environment"
"Industrial Technology Program Enhancement: The Importance of Strategic Planning"
"Supply Chain Management: Strategic Factors From the Buyers' Perspective"
"Assessing the Professional Development Needs of NAIT's Industry Division Members"
"Integrating Enterprise-Wide Risk Management Concepts into Industrial Technology Curricula"
"An Exploratory Study to Assess Competency Gaps in Science, Mathematics, Engineering, and Technological (SMET) Education">
"Challenges Ahead for Adobe's Portable Document Format"
"Dimensional Metrology: A Perspective on Structure and Lab Integration"
"The Status of NAIT: Perceptions of Industrial Technology Department Chairs"
"The Importance of TQM Concepts and Instruction as Perceived by Industrial and Vocational Training Personnel"
"The Future History of Industrial Technology"
"The Impact of Visualization Methodology on Spatial Problem Solutions Among High and Low Visual Achievers"
"Computer Management Information Systems and Computer Production Skills Needed by Industrial Technology Graduates as Perceived by Universities and Companies"
-N-
"The Accommodating Workplace: Making Room for Sensory Disabled Employees (Non-Refereed Article)"
"Women's Voices are Missing from Technology"
-O-
"Accreditation Self-Study Management Using a Website Content Management System"
"Using the Internet for an Accreditation Self-Study Portfolio"
"A Framework for Implementing Appropriate Manufacturing Systems in Developing Economies"
"Viewing Distance as a Variable in Discerning Grayscale Halftone Dots at Varying Screen Frequencies"
"An Industrial Technologist's Core Knowledge: Web-based Strategy for Defining our Discipline"
"An Update on Applied Quality Science at Bowling Green State University and the Instructional Use of Student-Based Applied Research as a Technology Transfer Mechanism: A Critical Element of Education for Technologists"
"WebDAV: A Web-Writing Protocol and More"
"The Importance of Student Organizations"
"Construction Careers Connection"
-P-
"Implementation of Multilevel Inverter-Fed Induction Motor Drive"
"Reality-Based Construction Project Management: A Constraint-Based 4D Simulation Environment"
"Computer Knowledge Report from a Student Self-Evaluation"
"Passive Solar Lighting Using Fiber Optics"
"The Role of Scholarship for Industrial Technology Faculty"
"A Technology Systems Course: An Essential Component of General Education Curriculum"
"A LabView-Based Instrumentation System for a Wind-Solar Hybrid Power Station"
"A Paradigm for Breadboard Use in Electronics Laboratory Instruction"
"A Hybrid Solar-Wind Power Generation System as an Instructional Resource for Industrial Technology Students"
"Service-Learning in an Introductory Course in Construction Management"
"A Management-Support Technique for the Selection of Rapid Prototyping Technologies"
"The Impact of ISO 9000 Certification on Quality Management Practices in Thailand"
"The Effect of Rest Periods on Hand Fatigue and Productivity"
-Q-
-R-
"Local Area Network (LAN) in Manufacturing"
Ragsdale, Mr. Tory, Dr. Richard Boser & Dr. Charles Duvel (Volume 18-3, May 2002)
"Recycled Foam and Cement Composites in Insulating Concrete Forms"
"A Study of Magneto-Resistive Read-Write Head Reliability Using Low-Frequency Noise Measurement Technique"
"Investigating Electrical Noise Signals in Metal Thin Films with Different Geometry"
"Implementation of Multilevel Inverter-Fed Induction Motor Drive"
"Teaching Kinematic Synthesis of Linkages without Complex Mathematics"
"Teaching Design for Manufacturability with Desktop Computer-Aided Analysis"
Rice, Mr. Fred S. (Volume 21-1, February 2005)
"A Relational Study of Wisconsin's Water Quality Operator Certification Program"
"The Accommodating Workplace: Making Room for Sensory Disabled Employees (Non-Refereed Article)"
Roberts, Dr. Freddy L., Dr. Steven W. McCrary, Mr. David Leslie, & Dr. Melvin R. Corley (Volume 23-2, April 2007)
"Validation of Project Time Decision-Support Tools and Processes"
"Quality Model in Web-Based Distance Learning: A Case Study"
"Factors and Measures of Quality Costs Program in the Manufacturing Environment"
"Quality Measurement and Good Practices in Web-Based Distance Learning: A Case Study of the Industrial Management Program at Central Missouri State University"
"Artificial Intelligence and the Internet: An Integral Part of the Factory of the Future"
Rosenthal, David A. (Volume 18-3, May, 2002)
"Implementing IP Services at the Network Edge - Book Review"
Rosenthal, David A. (Volume 18-2, February 2002)
"Cryptography Decrypted - Book Review"
-S-
"A LabView-Based Instrumentation System for a Wind-Solar Hybrid Power Station"
"A Method for Evaluating Expert System Shells for Classroom Instruction"
"A Hybrid Solar-Wind Power Generation System as an Instructional Resource for Industrial Technology Students"
"Assessment of Initial Awareness Knowledge and Sources of Influence Leading to Enrollment Decisions for Students Entering Four-Year Automotive Programs"
"Digitization and Graphic Communication: From Print Reproduction to Dynamic Image Generation"
"The Effect of Rest Periods on Hand Fatigue and Productivity"
"Effects of Tool Diameter Variations in On-Line Surface Roughness Recognition System"
"Transforming Leadership: An Assessment Tool"
"Transforming Leadership in the Manufacturing Industry"
"Competencies Identified as Important for 21st Century Plastering Contractors - A Rotational Delphi""Tensile Strength Comparison of Athletic Tapes: Assessed Using ASTM D3759M-96, Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes"
"Telecommunication Systems Program Evaluation: A Survey of TCS Alumni on the Curriculum" (Non-Refereed)
"Distance Learning: Issues and Concerns of Distance Learners"
"Color Quality Assurance for Package Printing"
"A National Benchmark Study of Computer Technology-related Programs in Industrial Technology"
"The Web-Enhanced Classroom"
"Evaluation of the Safety Content in the NAIT Certification Exam"
"Chinese Technology Management & Quality: A Brief Review of Status and Improvement Concerns in 2008 (Non-Refereed)"
"A Case Study of a Project Course Developed to Close Competency Gaps in an Industrial Technology Program"
"Team Performance and the Problem-Solving Approach"
"Construction Careers Connection"
"The Status of Industrial Interaction/Outreach in Industrial Technology"
"NAIT Demographics Study - 1997"
"Challenges Facing U.S. Manufacturing and Strategies (Non-Refereed)"
"Challenges Facing U.S. Manufacturing and Strategies (Non-Refereed)"
"Color Quality Assurance for Package Printing"
"Supply Chain Management: Strategic Factors From the Buyers' Perspective"
"Quality Model in Web-Based Distance Learning: A Case Study"
"Distance Education at Bowling Green State University: Challenge, Opportunities and Promise"
"Experiment to Determine Feasibility of Electronic Co-op Supervision: BGSU Case Study (Non-Refereed Article)"
"An Industrial Technologist's Core Knowledge: Web-based Strategy for Defining our Discipline"
"Proposal for Taking the Profession to the Next Level: Assessing Core Knowledge Through Online Methods"
>
"Developing Online Templates for ISO 9000-Based Standard Operating Procedures"
"An Update on Applied Quality Science at Bowling Green State University and the Instructional Use of Student-Based Applied Research as a Technology Transfer Mechanism: A Critical Element of Education for Technologists""Tensile Strength Comparison of Athletic Tapes: Assessed Using ASTM D3759M-96, Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes"
"The Development and Delivery of a Distance Learning (DL) Course in Industrial Technology"
"Developing Maximum Career Potential in Manufacturing Technology Curricula"
"Gauge Repeatability and Reproducibility Studies and Measurement Analysis: A Multimethod Exploration of the State of Practice"
"Comparative Analysis between Manufacturing and Construction Enterprises on the Use of Formalized Quality Programs"
"Developing a Practical Quality System to Improve Visual Inspections"
"Spatial Visualization: Fundamentals and Trends in Engineering Graphics"
"A Pilot Study for Integrating Virtual Reality into an Introductory Design and Graphics Course"
"An Integrated Framework for Assembly-Oriented Product Design and Optimization"
"The Relevance of Concurrent Engineering in Industrial Technology Programs"
"The Application of Artificial Networks to Monitoring and Control of an Induction Hardening Process"
"Teaching Geometric Dimensioning and Tolerancing in a Manufacturing Program"
"A Cross-Disciplinary Biotechnology Initiative: A New Frontier for Industrial Technology (Non-Refereed Article)"
"The Application of Artificial Networks to Monitoring and Control of an Induction Hardening Process"
"A Preliminary Study on the State of AutoID"
"A Preliminary Manufacturing Competencies Study of Small and Medium-Sized Manufacturers in Illinois"
"Implementation of Program Assessment in a Technical Department"
"Teaching Lean Manufacturing Concepts through Project-Based Learning and Simulation"
"Selecting Rapid Prototyping Systems"
"Integrating Rapid Prototyping Technology into the Curriculum"
"A Study Conducted to Investigate the Feasibility of Recycling Commingled Plastics Fiber in Concrete"
"Technology, Economics and Politics"
"The House of Competitiveness: The Marriage of Agile Manufacturing, Design for Six Sigma, and Lean Manufacturing with Quality Considerations"
"Research Publication Trends and Topics in the Journal of Industrial Technology"
"Service-Learning in an Introductory Course in Construction Management"
"Developing a Practical Quality System to Improve Visual Inspections"
"Enhancing Entry Level Skills in Quality Assurance: An Industry Perspective"
"Effective Assessment: A Model for Industrial Technology Programs"
"Trends in Online Education: Case Study at Southwest Missouri State University"
"Spatial Visualization: Fundamentals and Trends in Engineering Graphics"
"An Integrated Framework for Assembly-Oriented Product Design and Optimization"
"Classifying Color Bar Codes to Predict Scanning Success"
-T-
"The Influence of Manufacturing Facility Demographics on Manufacturing Competencies in North Carolina (Non-Refereed Article)"
"Ergonomic Analysis of a Multi-Task Industrial Lifting Station Using the NIOSH Method"
"Controlling Robot Through Internet Using Java"
"A Method for Evaluating Expert System Shells for Classroom Instruction"
"A Paradigm for Breadboard Use in Electronics Laboratory Instruction"
"A Hybrid Solar-Wind Power Generation System as an Instructional Resource for Industrial Technology Students"
"Measuring an Unknown, A Laboratory Problem for Basic Electronics"
"When the Accreditation Board Says "NO": A Chronicle of the Reaccreditation Process (Non-Refereed Article)"
"Applying Quality Engineering Technique to Improve Wastewater Treatment"
"Machinability: Employing a Drilling Experiment as a Teaching Tool"
"Plunge Cut Grinding Simplified: An Illustrative Student Experiment"
"The House of Competitiveness: The Marriage of Agile Manufacturing, Design for Six Sigma, and Lean Manufacturing with Quality Considerations"
-U-
"Chinese Technology Management & Quality: A Brief Review of Status and Improvement Concerns in 2008 (Non-Refereed)"
"Integrating Computer and Technology Systems Networks in Industrial Technology Programs (Non-Refereed Article)"
-V-
"Historical Changes to the NAIT Student Division: An Extreme Makeover (2001-2004)- Non-Refereed Article""Tensile Strength Comparison of Athletic Tapes: Assessed Using ASTM D3759M-96, Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes"
"The Application of Artificial Networks to Monitoring and Control of an Induction Hardening Process"
"A Method for Evaluating Expert System Shells for Classroom Instruction"
-W-
"Downsizing Effects on Organizational Development Capabilities at an Electric Utility"
"Determining if Destructive Testing Can be Reduced by Using Pre-Yield Strength Data in Analysis of Composite Reinforced Automotive Hood Assemblies"
>
"Developing Online Templates for ISO 9000-Based Standard Operating Procedures"
"Teaching Printing Industry Guidelines and Process Control: The State of the Profession"
"Viewing Distance as a Variable in Discerning Grayscale Halftone Dots at Varying Screen Frequencies"
"Technological Applications of Solid Modeling and Parametric Features"
"Characterizing Productivity of a 4kW CO2 Laser Cutting System for 0.25" Mild Steel Using Central Composite Methodology"
"Interaction Graphs for a Two-Level Combined Array Experiment Design"
"Staying Competitive: Links to Manufacturing Technology Networks"
"Cost Justification of Capital Equipment Using 'Economic Value Added' Analysis"
"The Importance of TQM Concepts and Instruction as Perceived by Industrial and Vocational Training Personnel"
"A Comparison of Selected Categories of Accreditation Standards of NAIT, ABET and AACSB"
"The Impacts of Quality Improvement Training on Fear/Anxiety in Organizations"
"A Study Conducted to Investigate the Feasibility of Recycling Commingled Plastics Fiber in Concrete"
"A Digital Dilemma: File Preparation for Archival Storage"
"Supply Chain Management: Strategic Factors From the Buyers' Perspective"
"An Exploratory Study to Assess Competency Gaps in Science, Mathematics, Engineering, and Technological (SMET) Education">
"Color Quality Assurance for Package Printing"
"The Implementation of Recycled Thermostat Composites in Thermoforming Molds"
"Quality Measurement and Good Practices in Web-Based Distance Learning: A Case Study of the Industrial Management Program at Central Missouri State University"
"The Value of Partnering with Academia (Non-Refereed)"
"Experimental Analysis of a Battery Thermal Management System: Implications and Applications for Industrial and Commercial Products"
"Historical Changes to the NAIT Student Division: An Extreme Makeover (2001-2004)- Non-Refereed Article"
"The Debate Over Which PLC Programming Lanquage is the State-of-the-Art"
"Plunge Cut Grinding Simplified: An Illustrative Student Experiment"
"Machinability: Employing a Drilling Experiment as a Teaching Tool"
Xia, Ms. Jingqing, Mr. Terry Bilke, Mr. Bill D. Bailey, Dr. Suhansa Rodchua & Dr. John W. Sinn (Volume 22-4, October 2006)
"Quality Model in Web-Based Distance Learning: A Case Study"
"Integrating the Thinking Process into the Product Design Chain"
"A Systematic Approach for Identifying Optimum Surface Roughness Performance in End-Milling Operations"
"Internet and Network Security"
-Z-
"Analysis of the Industrial Technology Electrical Systems Specialization Using DACUM"
"The Role of Scholarship for Industrial Technology Faculty"
"The Development and Delivery of a Distance Learning (DL) Course in Industrial Technology"
"An Analysis of Industrial Technology (IT) Programs in Meeting Students Needs: A Survey of IT Alumni"
"Key Characteristics of Industrial Technology Faculty: A National Survey of NAIT Accredited IT Programs"
"A Technology Systems Course: An Essential Component of General Education Curriculum"
"Development of an Accelerometer-Based Surface Roughness Prediction System in Turning Operations Using Multiple Regression Techniques"
"A Short Preview of Free Statistical Software Packages for Teaching Statistics to Industrial Technology Majors"
"A Progress Report on Y2K"
"A LabView-Based Instrumentation System for a Wind-Solar Hybrid Power Station"